killosteel.blogg.se - File name for canon mx310 driver

File name for canon mx310 driver serial number#
File name for canon mx310 driver serial#

Solution: Turn on the printer power, and perform the procedures from the beginning again.Ĭause 3: The downloaded upgrade firmware is not for your MX310. Solution: Connect the USB cable, and perform the procedures from the beginning again. If the following dialog box is displayed, the following causes are suspected: Review the bulleted items in the Printer Upgrade Utility window (in Step 1) then turn on the printer, and click 'Next'.Exit all application software, and double-click RomVUp to launch the Printer Upgrade Utility.The registered user's data such as the one-touch and coded speed dial numbers are retained and you don't need to register them again. All the data received in memory will be cleared by the firmware upgrade. * Before starting the firmware upgrade, print all received fax messages. * Connect a single MX310 printer unit to the computer via the USB cable, and disconnect all other printer units, if any.

Remove the USB cable from the direct print port (PictBridge).

(It will be helpful if you mark each line so that you can distinguish them when reconnecting them after the upgrade.)

Disconnect the telephone cord from the external device jack and the telephone line jack (marked "L").

Connect the MX310 to the computer, using the USB cable.

Upgrade procedure (UpgradeProcedure(Win).htm).

The following files are contained in the same folder as the RomVUp file:

Windows computer with the MX310 printer driver installed.

The following items are required for the upgrade: It is located on the carriage flexible cable holder (visible on the right of the carriage after the machine is turned on, the scanning unit is opened, and the carriage moves to the center).

File name for canon mx310 driver serial#

Please open scanner unit to check the machine's serial number.

File name for canon mx310 driver serial number#

The serial number consists of four alphabet characters and five numeric characters.

To confirm which version is installed, follow the instructions to step 6 or print a User's Data List. If the firmware version is 1.040, this upgrade is not necessary. Firmware Upgrade Procedure If the machine's serial number is within the range that is listed below and the machine's firmware version is from 1.010 to 1.030, please upgrade the firmware to version 1.040 using the below procedure.